tattoos
Multi-styled Text Generator at TextSpace.net

Wednesday, July 29, 2009

Peugeot Radio & CD Player


My CD player has been skipping a lot these days and it has been getting on my nerves. So I decided to take it apart and try to fix it. I guessed the laser lens is probably dirty or the guide rail has lost its lubrication.

To remove the player from the fascia, just insert four small screwdrivers into the slots at the sides.


The player is a VDO RD3-00, the type that has the car's VIN coded into its memory so that it won't play on any other car. More info at http://www.dndservices.co.uk/peugeot_psarcd100-00.html


ISO Connectors. Black for power, VAN bus data communication, etc. White for the four speakers. Blue for CD changer.


After opening the top cover, the fist thing I found was a piece of long hair wound around the disc clamp. This will definitely make a disc skip because it hinders the clamp's rotation. I'm not going to elaborate whose hair it was and how it got in. Removing the four screws shown in the picture allows removal of the CD transport mechanism.


The CD transport mechanism is connected to the main PCB by a ribbon cable. Gently pulling out the red connector will unhook the ribbon.


The amplifier is a TDA7385, giving out an average of 4 X 15W.


The main PCB. I think this is a good picture for the electronics engineer.


The guide rails looked dry. Since I did not have the right Torx bit, I could not remove the metal plate to get access to the guide rails and lens. Instead, using cotton buds, I dabbed some petroleum jelly onto the rails through the openings. Looking from the side, I also lubricated the screw gear. The lens can wait for another day.


Put some more petroleum jelly on the sliding mechanisms. Why petroleum jelly? It is the only lubricant soft enough that I have on hand.

After putting all parts back together into the car, the disc skipping problem is gone. Awesome!

No comments:

Post a Comment

 

blogger templates | Blogger